Product Introduction
Spring Cone Crusher
Cone crusher is suitable to crush various kinds of ores and rocks of medium or above medium hardness,and cone crusher is of stable structure, high efficiency, easy adjustment,and use economically, etc. The spring safety system of crusher acts as an overloading protection system that allows metals to pass through the crushing chamber so as not to damage the cone crusher. The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separated to make surereliable pertormance. The type of crushing chamber depends upon the size of feeding and fineness of the crushed product. The standard type(PYB) is applied to medium crushing,the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.
Working Principle
Spring Cone crusher crushes materials by the working surface between the movable cone and fixed cone. The movable cone of the cone crusher is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are derived by the eccentric shaft sleeve together.The eccentric shaft sleeve is driven by horizontal shaft and fabricated gear, and the wheel of the conveyor belt is derived by motor through v-belts.
The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve of cone crusher rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can beascended or descended by adjusting setting to adjust the width of discharge hole, consequently the output size is determined.
Advantage
1. The structure is classic, suitable for various working conditions and environments, and the equipment performance is stable and reliable.
2. The finished product is cubic in shape, with good particle size, meeting the demand for high-quality aggregates.
3. Replaceable cavity type, multi-purpose for one machine, meeting different process requirements for medium and fine crushing.
4. Utilizing a spring safety system with overload protection mechanism, it is easy to disassemble and maintain.
5. Adopting dual sealing protection of dry oil and water to extend bearing life.
Production Line
The material is first transported to the jaw crusher evenly and continuously through the vibrating feeder. After being crushed by the jaw crusher, it is conveyed to the impact crusher for secondary crushing. After the secondary crushing, the material is conveyed to the vibrating screen.During normal operation, thevibartion of exciter will drive the screen mesh fixed on the screen box vibrate, and then materials will be screened. The big and small materials fall from the upper side and lower side to the screen to get them separated.
If you would like a quote for the entire line, please click here to contact us.
Technical Parameter
Audited Supplier 
){kind=link}