HGM Series Three-Ring & Medium-Speed Micro-Powder Grinder
Introduction:
HGM series of Three-Ring & Medium-Speed Micro-Powder Grinder is a new kind of micro-powder processing equipment, which is invented through more than twenty times experiments and improvements, and based on twenty years of mill manufacture experience while absorbing advanced international machine manufacture techniques. HGM series of Three-Ring & Medium-Speed Micro-Powder Grinder is mainly used in processing non-inflammable, non-explosive, brittle material with hardness below six mohs, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talc, mica, magnesite, pyrophillite, ceyssatite, barite, gypsum, alunite, granite, fluorite, phosphate rock, kalium ore, float stone, more than 200 kinds of materials.
Characteristics:
Three-Ring & Medium-Speed Micro-Powder Mill has high efficiency and low cost. Its capacity is raised by 40% compared with airflow mill and mix mill on the condition that the materials, the drive and the fineness of the final powder are the same. The life span of tear & wear parts is more than that of straight impact crusher and turbine mill under the circumstance of same materials and fineness of the final powder. Usually, its life span is more than one year. There is no rolling bearing and screw in the grinding cavity, so as to avoid the damage to the machine caused by tear & wear of bearing and seals and the looseness of screws. The fineness of powder can reach <5μ M with d97 once.
| Model |
HGM60 |
HGM80 |
HGM100 |
| Average work diameter(mm) |
600 |
800 |
1000 |
| Roller number |
15 |
21 |
27 |
| Ring number |
2 |
2 |
2 |
| Feeding size (mm) |
≤ 10 |
≤ 10 |
≤ 10 |
| Fineness of final product |
μ m |
5-45 |
5-45 |
5-45 |
| mesh |
3250-325 |
3250-325 |
3250-325 |
| capacity (kg/h) |
350-2500 |
600-4000 |
900-6000 |
Electrical machinery power
(kw) |
Main engine |
37 |
55 |
90 |
| Chooses the powder machine |
11 |
18.5 |
30 |
| Air blower |
30 |
45 |
75 |
| Feeding engine |
0.06 |
0.06 |
0.15 |
| Discharge valve |
0.75 |
0.75 |
1.1 |
| Overall dimension(m) |
10× 2× 5.5 |
11.9× 2.7× 5.8 |
14.5× 3.8× 6.3 |
| Main frame weight(kg) |
5200 |
7000 |
9500 |
Pre-sale:
(1) device model choice.
(2) According to customer's special requirements, design and manufacture of products.
(3) training technical personnel for clients.
(4) the company free of charge to the user on-site engineering and technical personnel planning site for the user to design the best processes and programs.
Sale:
(1) product acceptance.
(2) to help customers develop construction programs.
After-sale:
(1) free to assign a dedicated service personnel, arrived at the scene and guide customers installation.
(2) equipment installation.
(3) on-site training of operators.
(4) complete sets of equipment installed, 1-2 full-time technical staff to stay free of charge to help customers on-site production of 1 month, until the user satisfaction
Audited Supplier 
){kind=link}
){kind=link}